How To Use Snap-On Clamps
Jiggly Greenhouse® carries a complete collection of parts essential for creating or maintaining a secure and long-lasting greenhouse or hoop house. One of the most important steps of building a sturdy outdoor structure that will endure even the harshest of elements is selecting the right, high-quality materials from a reliable source. The Jiggly Greenhouse® Snap-On Clamps are cost-effective and easy to use clamps that simply snap around a tubular frame to securely hold greenhouse film, shade cloth, netting or any other covering material. Compatible with PVC and EMT metal conduit, the Snap-On Clamps is used for temporary or permanent installations securing greenhouse coverings, sports netting, shade tarps, tents, and more even in high wind areas.
Jiggly Greenhouse®
Snap-On Clamps For PVC
- Dimensions: 3.410" x 1.206" x 1.170"
- Fits PVC And Other Tubular Frames
- Features Angled Ends For Re-Usability, Easily Snaps On And Off
- UV and Frost Resistant Material For Extended Lifetime Outdoor Use
- Attaches Grow Film, Shade Cloth, Netting And More To Tubular Frame
Jiggly Greenhouse®
Snap-On Clamps For EMT Conduit
- Dimensions: 3.410" x 1.206" x 1.170"
- Fits EMT Conduit And Other Tubular Frames
- Features Angled Ends For Re-Usability, Easily Snaps On And Off
- UV and Frost Resistant Material For Extended Lifetime Outdoor Use
- Attaches Grow Film, Shade Cloth, Netting And More To Tubular Frame
Installation & Reusability
Jiggly Greenhouse® Snap-On Clamps are used across a wide variety of outdoor structures that have PVC or EMT metal conduit framing. To install a Snap-On Clamp, position materials as desired and angle the clamp so that one end is closer to the frame than the other. Push the end down onto the frame, repeat for the other end of the clamp until it snaps over the pipe, it's that simple. The clamp features a cutout on both ends to fit a flathead screwdriver in order to make removing and reusing easier than any competitor's clamp. To remove the clamp from the frame, insert a flathead screwdriver into either end and pull up on the clamp.
Tips & Information
In order to provide maximum strength and stability for a frame - whether it's PVC or metal - placing a Jiggly Greenhouse® Snap-On Clamp every 2' is recommended. Spacing clamps evenly at this distance will create uniform stability throughout a frame. You can also easily protect your frame by lining clamps with electrical tape. This allows for the removal of a clamp without any damage to the frame. One of the biggest benefits of these economical clamps is that you can quickly and easily re-purpose and reuse them. Simply remove them and snap them into place for your next project. Click here to buy Jiggly Greenhouse® Snap-On Clamps and make your next greenhouse project a snap.